Proel S.p.A.
Via alla Ruenia 37/43, CAP 64027 Sant’Omero (TE) ITALY
P.Iva 00778590679 Cap.soc.: € 8.000.000 i.v. – C.C.I.A.A. Te R.E.A. n. 95381
Menu
With AE300 we were pioneers, with AE604 we are innovators. Wall mounted All-In-One voice alarm system compliant with EN54-16 testing and charge circuit compliant with EN54-4. 4 Zones System on redundant loudspeaker line and backup Amplifier. Main and backup amplifier in class D “Pure Path”™. 300W + 300W (600W Total) @ 100V on redundant loudspeaker line (A + B). The system does not require a line end resistor. The system ensures full power performance even with backup power. Processing circuit by DSP; balanced and isolated background music input, isolated and balanced background music microphone input with selectable 48Vdc phantom power supply and priority activation by contact; monitored input for remote emergency call stations; front panel fitted with monitor loudspeaker, monitored emergency PPT microphone, direct sending message keys, navigation keys, large display with LCD dot matrix. Line output; audio messages stored on uSD 16bit 48kHz: 8 general purpose messages with activation from dedicated input, contacts or incorporated scheduler, 8 monitored contacts for emergency announcement activation. 4pcs. 12Vdc batteries 18Ah not included.
| Model | AE604 |
| Main power source | AC mains 220V – 50/60Hz |
| Backup power source | 48V – built-in batteries (4x 12V 18A/h sealed lead acid) |
| Backup power unit life | 36h stand-by + 0.5h full power |
| Maximum power consumption | 700W |
| Constant voltage | 600W rms @ 1% THD on 100V loudspeaker line, all zones comvined |
| Frequency response | 100Hz – 18Khz @ -3dB |
| Signal to noise ratio | >90dB |
| Redundant power amplifier | Yes Zones and loudspeaker lines 4 zones, redundant louduspeaker lines (A+B) on each zone |
| Loudspeaker line monitoring | 20 KhZ FFT impedance measurement +/-5% range. Detection of line cut, line short, line grounding. No end of line needed |
| User interface | Status leds + dot-matrix display, menu navigation keyboard, direct access status keys (alarm, warning, silencing) |
| Audio processing | DSP based, 16bit-48Khz; 3-band equalizer, Compressor/expander on microphone inputs; Pre-gain and master volume controls; Chime |
| Audio inputs/outputs | Background music; microphone input with phantom supply and enable contact input. Subwoofer line output |
| Front panel loudspeaker monitor | Yes |
| Emergency Firemen microphones | Frontpanel microphone with monitored capsule RJ14 input for WG-MTU01 desktop emergency call station |
| General input controls | 8x dry contact inputs triggers for general announcement messages |
| General message scheduler | Yes |
| Input controls from fire alarm devices | 2x monitored input contacts against cable-cut and cable short. Alarm, warning |
| Output status reporting | 3x 1A 230V relay contacts (alarm, fault, disablement) |
| Communication | RS485, USB diagnostic port, Ethernet 10 BASE-T/100 |
| Battery monitoring | Internal resistance DC measurement |
| Certifications and compliancy | EN54-16, EN54-4, BS-EN5839-8, 60849 |
| Access restriction | Key-locked front door, password protected access to system menu |
| Chassiss and dimensions | Main Unit: W:470mm – H: 550mm – D: 235mm Battery Case: W:470mm – H: 220mm – D: 200mm |
| Weight | Main Unit: 21.2 Kg Battery Case: 5.15 Kg |
With AE300 we were pioneers, with AE604 we are innovators. Wall mounted All-In-One voice alarm system compliant with EN54-16 testing and charge circuit compliant with EN54-4. 4 Zones System on redundant loudspeaker line and backup Amplifier. Main and backup amplifier in class D “Pure Path”™. 300W + 300W (600W Total) @ 100V on redundant loudspeaker line (A + B). The system does not require a line end resistor. The system ensures full power performance even with backup power. Processing circuit by DSP; balanced and isolated background music input, isolated and balanced background music microphone input with selectable 48Vdc phantom power supply and priority activation by contact; monitored input for remote emergency call stations; front panel fitted with monitor loudspeaker, monitored emergency PPT microphone, direct sending message keys, navigation keys, large display with LCD dot matrix. Line output; audio messages stored on uSD 16bit 48kHz: 8 general purpose messages with activation from dedicated input, contacts or incorporated scheduler, 8 monitored contacts for emergency announcement activation. 4pcs. 12Vdc batteries 18Ah not included.
| Model | AE604 |
| Main power source | AC mains 220V – 50/60Hz |
| Backup power source | 48V – built-in batteries (4x 12V 18A/h sealed lead acid) |
| Backup power unit life | 36h stand-by + 0.5h full power |
| Maximum power consumption | 700W |
| Constant voltage | 600W rms @ 1% THD on 100V loudspeaker line, all zones comvined |
| Frequency response | 100Hz – 18Khz @ -3dB |
| Signal to noise ratio | >90dB |
| Redundant power amplifier | Yes Zones and loudspeaker lines 4 zones, redundant louduspeaker lines (A+B) on each zone |
| Loudspeaker line monitoring | 20 KhZ FFT impedance measurement +/-5% range. Detection of line cut, line short, line grounding. No end of line needed |
| User interface | Status leds + dot-matrix display, menu navigation keyboard, direct access status keys (alarm, warning, silencing) |
| Audio processing | DSP based, 16bit-48Khz; 3-band equalizer, Compressor/expander on microphone inputs; Pre-gain and master volume controls; Chime |
| Audio inputs/outputs | Background music; microphone input with phantom supply and enable contact input. Subwoofer line output |
| Front panel loudspeaker monitor | Yes |
| Emergency Firemen microphones | Frontpanel microphone with monitored capsule RJ14 input for WG-MTU01 desktop emergency call station |
| General input controls | 8x dry contact inputs triggers for general announcement messages |
| General message scheduler | Yes |
| Input controls from fire alarm devices | 2x monitored input contacts against cable-cut and cable short. Alarm, warning |
| Output status reporting | 3x 1A 230V relay contacts (alarm, fault, disablement) |
| Communication | RS485, USB diagnostic port, Ethernet 10 BASE-T/100 |
| Battery monitoring | Internal resistance DC measurement |
| Certifications and compliancy | EN54-16, EN54-4, BS-EN5839-8, 60849 |
| Access restriction | Key-locked front door, password protected access to system menu |
| Chassiss and dimensions | Main Unit: W:470mm – H: 550mm – D: 235mm Battery Case: W:470mm – H: 220mm – D: 200mm |
| Weight | Main Unit: 21.2 Kg Battery Case: 5.15 Kg |
Proel S.p.A.
Via alla Ruenia 37/43, CAP 64027 Sant’Omero (TE) ITALY
P.Iva 00778590679 Cap.soc.: € 8.000.000 i.v. – C.C.I.A.A. Te R.E.A. n. 95381
