PA BM04

BM04 – Digital 4-zone announcement microphone 4-zone.

COMMON FEATURESDigital microprocessor-controlled announcement microphone base, designed for use with the ZONE8 / ZONE8SLAVE and music and voice control centre. The Base features a high sensitivity electret condenser microphone capsule mounted with a flexible metal gooseneck to a durable plastic base with scratchproof finish. Themicrophoneelement offers excellent frequency response and a cardioid polar pattern. Audio and command signal transmission uses the RS485 system via CAT5UTP cables. Bases can be cascaded using the EASY–CHAIN system through RJ45 connectors. Power is supplied by the ZONE8 control centre or, in the case of very long cable runs, by not included 12VDC local power supply.

MAIN FEATURES

  • Electret condenser microphone on a flexible gooseneck.
  • Robust plastic base with scratch-proof fi nish and rubber feet
  • Local tone and volume control
  • Optional 3-tone announcement tone card with volume control
  • Excellent audio quality, even with long cable runs
  • “Busy” Led indicator for zones currently addressed by another base

BM01 – GENERAL DIGITAL ANNOUNCEMENT MICROPHONEDigital microphone stand for general announcement. All pushbutton is set for general call ( all zones) TALK pushbutton for direct microphone call equipped with activation led indicator.

BM04/08/16 -DIGITAL 4/8/16-ZONE ANNOUNCEMENT MICROPHONESelectable general or zone specifi c announcement capability The base features an “ALL” general announcement key, a “TALK” zonespecific announcement activator key, and four/eight/sixteen zone selector keys, each with an LED indicator.

BMZP – DIGITAL ZONE PROGRAMMABLE ANNOUNCEMENT MICROPHONEThe base is equipped with 16 internal dip switches (which should be set during installation) that assigns the call function to the different areas. Pressing the TALK button will instruct the base-unit to call the previously set areas.

Technical specifications

Type Cardioid
Sensitivity 4 mV/Pa
Output Levels Digital audio RS485
Controls 1 LEVEL CONTROL, 1 TONE CONTROL, ZONES, ON/OFF MICROPHONE, GENERAL CALL SWITCHES
Frequency response 150Hz – 12KHz (-3dB)
S/N Ratio > 100dB
Power Supply 12Vdc phantom or local
Gooseneck length 300 mm (11.811 inch)
Dimensions (W x H x D) 232 x 131 x 61mm
Weight 0.95Kg (2.095 lb)

Related products

PROEL-COMMERCIAL-AUDIO-300x300-1
PA BM04
BM04 – Digital 4-zone announcement microphone 4-zone.

COMMON FEATURESDigital microprocessor-controlled announcement microphone base, designed for use with the ZONE8 / ZONE8SLAVE and music and voice control centre. The Base features a high sensitivity electret condenser microphone capsule mounted with a flexible metal gooseneck to a durable plastic base with scratchproof finish. Themicrophoneelement offers excellent frequency response and a cardioid polar pattern. Audio and command signal transmission uses the RS485 system via CAT5UTP cables. Bases can be cascaded using the EASY–CHAIN system through RJ45 connectors. Power is supplied by the ZONE8 control centre or, in the case of very long cable runs, by not included 12VDC local power supply.

MAIN FEATURES

  • Electret condenser microphone on a flexible gooseneck.
  • Robust plastic base with scratch-proof fi nish and rubber feet
  • Local tone and volume control
  • Optional 3-tone announcement tone card with volume control
  • Excellent audio quality, even with long cable runs
  • “Busy” Led indicator for zones currently addressed by another base

BM01 – GENERAL DIGITAL ANNOUNCEMENT MICROPHONEDigital microphone stand for general announcement. All pushbutton is set for general call ( all zones) TALK pushbutton for direct microphone call equipped with activation led indicator.

BM04/08/16 -DIGITAL 4/8/16-ZONE ANNOUNCEMENT MICROPHONESelectable general or zone specifi c announcement capability The base features an “ALL” general announcement key, a “TALK” zonespecific announcement activator key, and four/eight/sixteen zone selector keys, each with an LED indicator.

BMZP – DIGITAL ZONE PROGRAMMABLE ANNOUNCEMENT MICROPHONEThe base is equipped with 16 internal dip switches (which should be set during installation) that assigns the call function to the different areas. Pressing the TALK button will instruct the base-unit to call the previously set areas.

Type Cardioid
Sensitivity 4 mV/Pa
Output Levels Digital audio RS485
Controls 1 LEVEL CONTROL, 1 TONE CONTROL, ZONES, ON/OFF MICROPHONE, GENERAL CALL SWITCHES
Frequency response 150Hz – 12KHz (-3dB)
S/N Ratio > 100dB
Power Supply 12Vdc phantom or local
Gooseneck length 300 mm (11.811 inch)
Dimensions (W x H x D) 232 x 131 x 61mm
Weight 0.95Kg (2.095 lb)

Share this product

Facebook
Twitter
LinkedIn
Telegram
WhatsApp
Email
Skype