Proel S.p.A.
Via alla Ruenia 37/43, CAP 64027 Sant’Omero (TE) ITALY
P.Iva 00778590679 Cap.soc.: € 8.000.000 i.v. – C.C.I.A.A. Te R.E.A. n. 95381
The AUP240B class-D power amplifier features switching power supply, atechnology that offers minimal power consumption and efficiency up to 85%. TheAUP240B has a rated output power of 240W and can be used with a mixer or preamplifierto set up a public address system. The loudspeaker outputs, both high impedance100V and low impedance 8 Ohm, allow you to meet both PA fixed installation andHi-Fi stereo audio installation requirements. The balanced line input featuresa Euroblock connector and input level control. The integrated high-pass filterat the output can be enabled or disabled via dip switch. There is also thefunction of enabling automatic standby after no input signal detection for oneminute and immediate reactivation with any input signal detection. Operatingstatus LED indicators include protect, clip, input and output for easysupervision. With full short circuit, overload, high temperature, clip and DCprotection, the AUP240B meets precise operating criteria and has been designedand tested to ensure maximum reliability in extended use.
MAIN FUNCTIONS
Model | AUP240B |
Amplifier Technology | CLASS D power amplifier |
Output power RMS | 240 W |
Loudspeakers outputs | 100V / 8Ω |
Inputs | balanced Euroblock connector |
Input Sensitivity | 0.775Vrms, 0dBu balanced 1.55Vrms, +6dBu unbalanced |
Input Impedance | 10 KΩ |
Controls | LEVEL CONTROL HIGH PASS FILTER STANDBY |
THD | < 0.1% |
S/N Ratio | ≥ 80dB |
Frequency response | 20Hz -20KHz (-3dB) |
Operating temperature | 0 ÷ +45°C |
Power Consumption | 300 W |
Power Supply | 230V~ 50/60Hz |
Dimensions (LxHxP) | 484 x 44 x 420 mm |
Weight | 4.2 Kg |
The AUP240B class-D power amplifier features switching power supply, atechnology that offers minimal power consumption and efficiency up to 85%. TheAUP240B has a rated output power of 240W and can be used with a mixer or preamplifierto set up a public address system. The loudspeaker outputs, both high impedance100V and low impedance 8 Ohm, allow you to meet both PA fixed installation andHi-Fi stereo audio installation requirements. The balanced line input featuresa Euroblock connector and input level control. The integrated high-pass filterat the output can be enabled or disabled via dip switch. There is also thefunction of enabling automatic standby after no input signal detection for oneminute and immediate reactivation with any input signal detection. Operatingstatus LED indicators include protect, clip, input and output for easysupervision. With full short circuit, overload, high temperature, clip and DCprotection, the AUP240B meets precise operating criteria and has been designedand tested to ensure maximum reliability in extended use.
MAIN FUNCTIONS
Model | AUP240B |
Amplifier Technology | CLASS D power amplifier |
Output power RMS | 240 W |
Loudspeakers outputs | 100V / 8Ω |
Inputs | balanced Euroblock connector |
Input Sensitivity | 0.775Vrms, 0dBu balanced 1.55Vrms, +6dBu unbalanced |
Input Impedance | 10 KΩ |
Controls | LEVEL CONTROL HIGH PASS FILTER STANDBY |
THD | < 0.1% |
S/N Ratio | ≥ 80dB |
Frequency response | 20Hz -20KHz (-3dB) |
Operating temperature | 0 ÷ +45°C |
Power Consumption | 300 W |
Power Supply | 230V~ 50/60Hz |
Dimensions (LxHxP) | 484 x 44 x 420 mm |
Weight | 4.2 Kg |
Proel S.p.A.
Via alla Ruenia 37/43, CAP 64027 Sant’Omero (TE) ITALY
P.Iva 00778590679 Cap.soc.: € 8.000.000 i.v. – C.C.I.A.A. Te R.E.A. n. 95381