PA AUP160D

160W Power Amplifier

This new series of audio power amplifiers was designed to fulfil an evolving market in the most flexible and professional manner.

The new range responds to precise operating criteria and was designed and tested to guarantee total reliability of use, also with continuous operation.

Thanks to the use of power supply switching with SMPS (switch mode power supply) technology and to the constant voltage output 70/100V obtained electronically without transformers, it was possible to design the amplifier in only two rack units, succeeding in containing the weight and size.

MAIN FUNCTIONS:

Speakers overload and short-circuit protection circuit.
Led start-up indicator
Led level indicator
Volume general control (Master)
Low and high pitch adjustment
Illuminated knobs
Line input balanced on Euroblock terminal
Line output balanced on Euroblock terminal
3 outputs, one at constant 4Ω impedance and two at constant voltage (70/100V)
230/117V~ 50/60Hz autoswitch power supply
1 U-shaped fins to fasten to a 19″ rack

Technical specifications

Model	AUP160D
Output	power RMS 160W
Inputs	1 x balanced line Input
Sensitivity	Line: 1V/47kΩ – variable gain 600Ω
Controls	Master volume control Treble tone control Bass tone control
Loudspeakers outputs	100/70V/4Ω
Frequency response	80Hz -16KHz (-3dB)
Distortion (THD)	< 0.5% (@ Pnom 1KHz)
S/N Ratio	≥80dB
Power Supply	autoswitch 100-240V~ 50/60Hz
Operating temperature	0 -40°C
Input/Output Connectors	terminal block
Power Consumption	160VA
Dimensions (LxHxP)	439 x 44 x 300 mm – 483 x 44 x 300 mm – 1U rack19”
Weight	4.5Kg

DOWNLOAD

PA AUP160D

160W Power Amplifier

This new series of audio power amplifiers was designed to fulfil an evolving market in the most flexible and professional manner.

The new range responds to precise operating criteria and was designed and tested to guarantee total reliability of use, also with continuous operation.

MAIN FUNCTIONS:

Speakers overload and short-circuit protection circuit.
Led start-up indicator
Led level indicator
Volume general control (Master)
Low and high pitch adjustment
Illuminated knobs
Line input balanced on Euroblock terminal
Line output balanced on Euroblock terminal
3 outputs, one at constant 4Ω impedance and two at constant voltage (70/100V)
230/117V~ 50/60Hz autoswitch power supply
1 U-shaped fins to fasten to a 19″ rack

Model	AUP160D
Output	power RMS 160W
Inputs	1 x balanced line Input
Sensitivity	Line: 1V/47kΩ – variable gain 600Ω
Controls	Master volume control Treble tone control Bass tone control
Loudspeakers outputs	100/70V/4Ω
Frequency response	80Hz -16KHz (-3dB)
Distortion (THD)	< 0.5% (@ Pnom 1KHz)
S/N Ratio	≥80dB
Power Supply	autoswitch 100-240V~ 50/60Hz
Operating temperature	0 -40°C
Input/Output Connectors	terminal block
Power Consumption	160VA
Dimensions (LxHxP)	439 x 44 x 300 mm – 483 x 44 x 300 mm – 1U rack19”
Weight	4.5Kg

PA AUP160D

160W Power Amplifier

Technical specifications

DOWNLOAD

Share this product