PA ACD150

Combo amplifier. This unit is designed for speech,music,paging and sound reinforcement applications.

150W COMBO AMPLIFIER This unit is designed for speech, music, paging and sound reinforcement applications. Main features – State-of-the-art design and manufacturing accuracy. – 150W RMS output power. – Extended frequency response: 50 Hz – 15KHz ± 3 dB. – Low distortion and low noise level. – CD player with on/off switch and volume control. – Master output volume control. – Bass and Treble tone controls. – LED level indicator. – Three unbalanced microphone inputs. – One Aux input and one output line. (Located on rear panel). – Six outputs – three constant impedance outputs (4?, 8? and 16?) – three constant voltage outputs (25 V, 70 V and 100 V). – Line level output for tape recorder or additional amplifier. – Switchable power supply (115V – 230 V). – Protection circuits.

Technical specifications

[Frequency response: 50 Hz – 15 KHz]
[Distortion (THD): Less than 1% @ 1000 Hz, full RMS power]
[S/N Ratio: 80 dB]
[Power Supply: 115 V A.C. or 230 V A.C.]
[Dimensions (W x H x D): 450 – 100 – 335]
[Weight:12.35 lb ]
[Constant impedance output: 4 ohm, 8 ohm, 16 ohm]
[Constant voltage output: 25 V / 70 V / 100 V]
[Input Connectors: MIC 1 – MIC3 6.3 mm jack 600 ohm, unbal.
RCA stereo AUX]
[Output Connectors: 4 ohm, 8 ohm, 16 ohm on terminal board
25 V / 70 V / 100 V on terminal board
RCA LINE output]
[Tone controls: BASS: +/- 10 dB @ 100 Hz
TREBLE: +/- 10 dB @ 100 KHz]
[Volume controls: MIC 1 – 3 volume controls
AUX volume control
Tones (BASS – TREBLE)
CD player volume control
Output MASTER volume control]
[Indicators (LED): Power LED
Output power level LED ladder]
[Power consumption: 380 W @ 150 W RMS power]
[Output power RMS:150 ]
[Output power Max:210 ]

PROEL-COMMERCIAL-AUDIO-300x300-1
PA ACD150
Combo amplifier. This unit is designed for speech,music,paging and sound reinforcement applications.

150W COMBO AMPLIFIER This unit is designed for speech, music, paging and sound reinforcement applications. Main features – State-of-the-art design and manufacturing accuracy. – 150W RMS output power. – Extended frequency response: 50 Hz – 15KHz ± 3 dB. – Low distortion and low noise level. – CD player with on/off switch and volume control. – Master output volume control. – Bass and Treble tone controls. – LED level indicator. – Three unbalanced microphone inputs. – One Aux input and one output line. (Located on rear panel). – Six outputs – three constant impedance outputs (4?, 8? and 16?) – three constant voltage outputs (25 V, 70 V and 100 V). – Line level output for tape recorder or additional amplifier. – Switchable power supply (115V – 230 V). – Protection circuits.

[Frequency response: 50 Hz – 15 KHz]
[Distortion (THD): Less than 1% @ 1000 Hz, full RMS power]
[S/N Ratio: 80 dB]
[Power Supply: 115 V A.C. or 230 V A.C.]
[Dimensions (W x H x D): 450 – 100 – 335]
[Weight:12.35 lb ]
[Constant impedance output: 4 ohm, 8 ohm, 16 ohm]
[Constant voltage output: 25 V / 70 V / 100 V]
[Input Connectors: MIC 1 – MIC3 6.3 mm jack 600 ohm, unbal.
RCA stereo AUX]
[Output Connectors: 4 ohm, 8 ohm, 16 ohm on terminal board
25 V / 70 V / 100 V on terminal board
RCA LINE output]
[Tone controls: BASS: +/- 10 dB @ 100 Hz
TREBLE: +/- 10 dB @ 100 KHz]
[Volume controls: MIC 1 – 3 volume controls
AUX volume control
Tones (BASS – TREBLE)
CD player volume control
Output MASTER volume control]
[Indicators (LED): Power LED
Output power level LED ladder]
[Power consumption: 380 W @ 150 W RMS power]
[Output power RMS:150 ]
[Output power Max:210 ]

Share this product

Facebook
Twitter
LinkedIn
Telegram
WhatsApp
Email
Skype