Q-NEX10.4 combines cutting-edge Class Dtechnology and Switch Mode Power Supply to deliver up to 10 000 W across4 channels. With a universal power supply featuring PFC (Power FactorCorrection), they ensure consistent performance even during power fluctuations,always delivering maximum power. The advanced Power Control Management systemintelligently distributes power across channels, allowing a single channel toachieve peak output when needed.
Theseamplifiers stand out for their superior sound quality, offering high fidelityacross the full audio range, exceptional dynamics, and low distortion even athigh power levels. Their efficiency exceeds 90%, resulting in minimal heatdissipation, reduced energy consumption, and lower operating costs, making themboth economical and environmentally friendly. Compact and lightweight, Q-NEXamplifiers are easy to transport, further enhancing their eco-friendlycredentials.
To ensuredurability and reliability, Q-NEX amplifiers are equipped with extensiveprotection features, including safeguards against overheating, short circuits,mismatched loads, and voltage spikes. An ergonomic, up-side-down designminimizes dust accumulation on fans, while removable filters simplifymaintenance in any environment.
The Q-NEXsystem is powered by the CORE2 DSP platform, developed with advanced SHARCtechnology for 40-bit floating-point resolution and top-tier 24-bit AD/DAconverters, ensuring over 110dB dynamic range and impeccable sound quality. Itsrobust processing capabilities enable sophisticated speaker algorithms,including linear phase FIR filters, along with comprehensive remote control andnetworking functions.
The DSPsection offers extensive tools: each input includes 5-band parametric EQ,1024-tap FIR filter, programmable compressor/limiter, and up to 600ms delay.Outputs feature crossovers up to 48dB/octave, 10-band PEQ, dynamic EQ, duallimiters, and the same delay range. A flexible routing matrix allows seamlesssignal assignment between inputs and outputs for maximum configurationversatility.
The PRONETAX software, using a reliable CANBUS network protocol, offers an intuitiveinterface for remote control via etherCON RJ45 connectors. It allows fullaccess to processing parameters and real-time amplifier status monitoring.
| Outputs | |
| N° of Channels | 4 |
| Total Output Power | 10000 W |
| Low Z – Output Power* | |
| @ 2Ω | 4×2500 W / 1×2500 W (single ch. driven) |
| @ 2.67Ω | 4×2500 W / 1×3300 W (single ch. driven) |
| @ 4Ω | 4×2500 W / 1×2500 W (single ch. driven) |
| @ 8Ω | 4×1250 W / 1×1300 W (single ch. driven) |
| Bridged @ 4Ω | 2×5000 W |
| Bridged @ 8Ω | 2×5000 W |
| High Z – Output Power* | |
| Hi-Z 100V | 4×2500 W / 1×2500 W (single ch. driven) |
| Hi-Z 70V | 4×2500 W / 1×2500 W (single ch. driven) |
| Max output voltage | 150 Vpeak |
| Max output current | 50 Apeak |
* IEC filtered pink noise signal (40Hz-5kHz, 12dB crest factor) | |
| Audio Specifications | |
| Frequency response | 20 Hz – 20 kHz |
| Input Sensitivity | +10 dBu (DSP adjustable) |
| Gain | 32 dB |
| S/N Ratio | 111 dBA |
| THD+N | < 0.05 % |
| Input Impedance | 30 Kohm (bal) / 15 Kohm (unbal) |
| Input Connectors | Input: XLR-F Link: XLR-M |
| Output Connectors | NL4 Speakon |
| Network Connectors | 2 x ETHERCON® (NE8FAV) |
| DSP | |
| Signal Processing | CORE2, 40bit floating point SHARC DSP, 24 bit AD/DA converters |
| Direct access Controls | Capacitive touch panel – Dial – Terminate |
| Remote Controls | PRONET AX control software |
| General Specifications | |
| Cooling | Variable speed DC fan |
| Protections | Soft-start, Turn-on Turn-off transients, Muting at turn-on, Over-heating, DC, RF, Short-circuit, Open or mismatched loads, Overloaded power supply, Clip Limiting |
| Power Supply | 90V – 265V AC, 50Hz-60Hz |
| 1/8 Rated Power | 7.3 A |
| Weight (Net) | 7 kg (15.4 lbs) |
| Dimensions (W x H x D) | 483x89x355 mm (19”x3.5”x14”) |
Q-NEX10.4 combines cutting-edge Class Dtechnology and Switch Mode Power Supply to deliver up to 10 000 W across4 channels. With a universal power supply featuring PFC (Power FactorCorrection), they ensure consistent performance even during power fluctuations,always delivering maximum power. The advanced Power Control Management systemintelligently distributes power across channels, allowing a single channel toachieve peak output when needed.
Theseamplifiers stand out for their superior sound quality, offering high fidelityacross the full audio range, exceptional dynamics, and low distortion even athigh power levels. Their efficiency exceeds 90%, resulting in minimal heatdissipation, reduced energy consumption, and lower operating costs, making themboth economical and environmentally friendly. Compact and lightweight, Q-NEXamplifiers are easy to transport, further enhancing their eco-friendlycredentials.
To ensuredurability and reliability, Q-NEX amplifiers are equipped with extensiveprotection features, including safeguards against overheating, short circuits,mismatched loads, and voltage spikes. An ergonomic, up-side-down designminimizes dust accumulation on fans, while removable filters simplifymaintenance in any environment.
The Q-NEXsystem is powered by the CORE2 DSP platform, developed with advanced SHARCtechnology for 40-bit floating-point resolution and top-tier 24-bit AD/DAconverters, ensuring over 110dB dynamic range and impeccable sound quality. Itsrobust processing capabilities enable sophisticated speaker algorithms,including linear phase FIR filters, along with comprehensive remote control andnetworking functions.
The DSPsection offers extensive tools: each input includes 5-band parametric EQ,1024-tap FIR filter, programmable compressor/limiter, and up to 600ms delay.Outputs feature crossovers up to 48dB/octave, 10-band PEQ, dynamic EQ, duallimiters, and the same delay range. A flexible routing matrix allows seamlesssignal assignment between inputs and outputs for maximum configurationversatility.
The PRONETAX software, using a reliable CANBUS network protocol, offers an intuitiveinterface for remote control via etherCON RJ45 connectors. It allows fullaccess to processing parameters and real-time amplifier status monitoring.
| Outputs | |
| N° of Channels | 4 |
| Total Output Power | 10000 W |
| Low Z – Output Power* | |
| @ 2Ω | 4×2500 W / 1×2500 W (single ch. driven) |
| @ 2.67Ω | 4×2500 W / 1×3300 W (single ch. driven) |
| @ 4Ω | 4×2500 W / 1×2500 W (single ch. driven) |
| @ 8Ω | 4×1250 W / 1×1300 W (single ch. driven) |
| Bridged @ 4Ω | 2×5000 W |
| Bridged @ 8Ω | 2×5000 W |
| High Z – Output Power* | |
| Hi-Z 100V | 4×2500 W / 1×2500 W (single ch. driven) |
| Hi-Z 70V | 4×2500 W / 1×2500 W (single ch. driven) |
| Max output voltage | 150 Vpeak |
| Max output current | 50 Apeak |
* IEC filtered pink noise signal (40Hz-5kHz, 12dB crest factor) | |
| Audio Specifications | |
| Frequency response | 20 Hz – 20 kHz |
| Input Sensitivity | +10 dBu (DSP adjustable) |
| Gain | 32 dB |
| S/N Ratio | 111 dBA |
| THD+N | < 0.05 % |
| Input Impedance | 30 Kohm (bal) / 15 Kohm (unbal) |
| Input Connectors | Input: XLR-F Link: XLR-M |
| Output Connectors | NL4 Speakon |
| Network Connectors | 2 x ETHERCON® (NE8FAV) |
| DSP | |
| Signal Processing | CORE2, 40bit floating point SHARC DSP, 24 bit AD/DA converters |
| Direct access Controls | Capacitive touch panel – Dial – Terminate |
| Remote Controls | PRONET AX control software |
| General Specifications | |
| Cooling | Variable speed DC fan |
| Protections | Soft-start, Turn-on Turn-off transients, Muting at turn-on, Over-heating, DC, RF, Short-circuit, Open or mismatched loads, Overloaded power supply, Clip Limiting |
| Power Supply | 90V – 265V AC, 50Hz-60Hz |
| 1/8 Rated Power | 7.3 A |
| Weight (Net) | 7 kg (15.4 lbs) |
| Dimensions (W x H x D) | 483x89x355 mm (19”x3.5”x14”) |
