Proel S.p.A.
Via alla Ruenia 37/43, CAP 64027 Sant’Omero (TE) ITALY
P.Iva 00778590679 Cap.soc.: € 8.000.000 i.v. – C.C.I.A.A. Te R.E.A. n. 95381
DESCRIPTION
The AX8CL Line Array is a passive system equipped with eight 2.5” neodymium transducers with waterproof cones, designed for portable and permanently installed applications where high power and clarity are needed. The aluminum frame box structure ensures lightweight and strength, while the shape features a back-loaded transmission line design with clean mid-bass reproduction and natural cardioid behavior. The wide horizontal dispersion make the system flexible and adaptable to many different applications.
THE SYSTEM
The AX8CL line array module has been designed to be used as a stand-alone or multiple column system in fixed installations, frontfill, or under balcony applications, and for low-profile stage monitoring solutions. It can also be combined with AX16CL columns in multiple column systems in different configurations.
The AX8CL can be driven by the SW212A processed active subwoofer. Up to eight AX8CL modules (or different combinations of AX8CL and AX16CL) can be driven by one channel of the SW212A. Different presets for different combinations are available for the built-in CORE2 DSP, which can be also remotely controlled using PRONET AX software.
RIGGING HARDWARE AND ACCESSORIES
Thanks to its elegant mechanical design the AX8CL can be easily transported, while the integrated suspension system makes its deployment very fast and simple. Each unit comes with two aluminum brackets and two pins that allows multiple array elements to be easily combined either together, with the AX16CL or with the matching SW212A subwoofer. The brackets allow inter-cabinet angles of 0°, 2° and 4°.
A complete range of accessories for transport, installation and connections are available.
KEY FEATURES
| SYSTEM | |
| System’s Acoustic Principle | Line Array Element Short Transmission Line Back Loading |
| Frequency Response (±3dB) | 200 Hz – 16kHz (Processed) |
| Nominal Impedance | 64 Ohm |
| Minimum Impedance | 49 Ohm |
| Horizontal Coverage Angle | 80° (-6dB) |
| Sensitivity (4V) | 94 dB SPL @ 1m* |
| Maximum Peak SPL @ 1m | 122 dB |
| TRANSDUCERS | |
| Type | 8 x 2.5″ (66mm) Neodymium magnet woofers, 0.8″ (20mm) VC |
| Waterproof Cone | Waterproof Cone |
| Ventilated voice coil | Ventilated voice coil |
| INPUT CONNECTIONS | |
| Connector Type | Neutrik® Speakon® NL4 x 2 (1+/1- signal IN & LINK ; 2+/2- thru) |
| POWER HANDLING | |
| Continuous AES Pink Noise Power | 160 W |
| Program Power | 320 W |
| ENCLOSURE & CONSTRUCTION | |
| Dimensions (W x H x D) | 90 mm (3.54”) x 654 mm (25.76”) x 154 mm (6.06”) |
| Enclosure Material | Aluminum |
| Paint | High resistance, water based paint, black or white finish |
| Flying system | Aluminum Fast Link structure with dedicated pins |
| Net Weight | 6 Kg (12,2 lbs.) |
| *measured @4 m and scaled @1 m | |
DESCRIPTION
The AX8CL Line Array is a passive system equipped with eight 2.5” neodymium transducers with waterproof cones, designed for portable and permanently installed applications where high power and clarity are needed. The aluminum frame box structure ensures lightweight and strength, while the shape features a back-loaded transmission line design with clean mid-bass reproduction and natural cardioid behavior. The wide horizontal dispersion make the system flexible and adaptable to many different applications.
THE SYSTEM
The AX8CL line array module has been designed to be used as a stand-alone or multiple column system in fixed installations, frontfill, or under balcony applications, and for low-profile stage monitoring solutions. It can also be combined with AX16CL columns in multiple column systems in different configurations.
The AX8CL can be driven by the SW212A processed active subwoofer. Up to eight AX8CL modules (or different combinations of AX8CL and AX16CL) can be driven by one channel of the SW212A. Different presets for different combinations are available for the built-in CORE2 DSP, which can be also remotely controlled using PRONET AX software.
RIGGING HARDWARE AND ACCESSORIES
Thanks to its elegant mechanical design the AX8CL can be easily transported, while the integrated suspension system makes its deployment very fast and simple. Each unit comes with two aluminum brackets and two pins that allows multiple array elements to be easily combined either together, with the AX16CL or with the matching SW212A subwoofer. The brackets allow inter-cabinet angles of 0°, 2° and 4°.
A complete range of accessories for transport, installation and connections are available.
KEY FEATURES
| SYSTEM | |
| System’s Acoustic Principle | Line Array Element Short Transmission Line Back Loading |
| Frequency Response (±3dB) | 200 Hz – 16kHz (Processed) |
| Nominal Impedance | 64 Ohm |
| Minimum Impedance | 49 Ohm |
| Horizontal Coverage Angle | 80° (-6dB) |
| Sensitivity (4V) | 94 dB SPL @ 1m* |
| Maximum Peak SPL @ 1m | 122 dB |
| TRANSDUCERS | |
| Type | 8 x 2.5″ (66mm) Neodymium magnet woofers, 0.8″ (20mm) VC |
| Waterproof Cone | Waterproof Cone |
| Ventilated voice coil | Ventilated voice coil |
| INPUT CONNECTIONS | |
| Connector Type | Neutrik® Speakon® NL4 x 2 (1+/1- signal IN & LINK ; 2+/2- thru) |
| POWER HANDLING | |
| Continuous AES Pink Noise Power | 160 W |
| Program Power | 320 W |
| ENCLOSURE & CONSTRUCTION | |
| Dimensions (W x H x D) | 90 mm (3.54”) x 654 mm (25.76”) x 154 mm (6.06”) |
| Enclosure Material | Aluminum |
| Paint | High resistance, water based paint, black or white finish |
| Flying system | Aluminum Fast Link structure with dedicated pins |
| Net Weight | 6 Kg (12,2 lbs.) |
| *measured @4 m and scaled @1 m | |
Proel S.p.A.
Via alla Ruenia 37/43, CAP 64027 Sant’Omero (TE) ITALY
P.Iva 00778590679 Cap.soc.: € 8.000.000 i.v. – C.C.I.A.A. Te R.E.A. n. 95381
