AMP03VR was specifically designed to deliver announcements and/or music programs through P.A. systems. It can be powered both from a standard AC mains network or by 12 V DC, therefore it is particularly useful for audio distribution on board vehicles.
MAIN FEATURES:
| RMS Output Power | AC 30 W – DC 25 W |
| Constant Voltage Output | 100 V / 70 V / 25 V |
| Constant Impedance Output | 4Ohm |
| Connettori d’Ingresso: MIC1, MIC2 | unbalanced 6.3mm jack (30 – 600 W) |
| AUX /PHONE | RCA 10 kW |
| Output connectors | 4Ohmon screw terminal – 25 V/70V/100V on screw terminal |
| Frequency Response | 80 Hz – 18 kHz |
| THD | < 1% |
| Signal-to-noise ratio | MIC1, MIC2:≥65 dB |
| AUX | ≥75 dB |
| PHONE | ≥55 dB |
| Input Sensitivity | MIC1, MIC2: -50 dBV @ 1 kHz – AUX: -20 dBV @ 1 kHz – PHONE: -50 dBV @ 1 kHz |
| Power Supply | 220 V AC – 117 V AC 50/60 Hz – 12 V DC 5 A |
| Dimensions (LxHxP) | 280x190x75 mm |
| Weight | 4,5Kg |
AMP03VR was specifically designed to deliver announcements and/or music programs through P.A. systems. It can be powered both from a standard AC mains network or by 12 V DC, therefore it is particularly useful for audio distribution on board vehicles.
MAIN FEATURES:
| RMS Output Power | AC 30 W – DC 25 W |
| Constant Voltage Output | 100 V / 70 V / 25 V |
| Constant Impedance Output | 4Ohm |
| Connettori d’Ingresso: MIC1, MIC2 | unbalanced 6.3mm jack (30 – 600 W) |
| AUX /PHONE | RCA 10 kW |
| Output connectors | 4Ohmon screw terminal – 25 V/70V/100V on screw terminal |
| Frequency Response | 80 Hz – 18 kHz |
| THD | < 1% |
| Signal-to-noise ratio | MIC1, MIC2:≥65 dB |
| AUX | ≥75 dB |
| PHONE | ≥55 dB |
| Input Sensitivity | MIC1, MIC2: -50 dBV @ 1 kHz – AUX: -20 dBV @ 1 kHz – PHONE: -50 dBV @ 1 kHz |
| Power Supply | 220 V AC – 117 V AC 50/60 Hz – 12 V DC 5 A |
| Dimensions (LxHxP) | 280x190x75 mm |
| Weight | 4,5Kg |
