DS112P

LNE SYSTEM SERIES 2 WAY FULL RANGE HIGH DIRECTIVITY PASSIVE SPEAKER

‘Engineered and designed be a system capable of providing sound reinforcement in a limited area minimising the emission of noise / disturbance to the surrounding areas. Small in size, the system can be integrated to any structure type ceiling, walls and roofs, both indoors and outdoors. The speaker is equipped with custom transducers, studied speci. Cally for this project to create a sound that has both high . delity and high directivity. The DS112P / T is a two-way speaker system with highly controlled directivity. Its configuration allows it to control directivity as low as medium-low frequencies (around 500Hz), even though the physical dimensions are very small. This marked tendency to control the energy emitted within its cone of radiation especially in the vocal range makes it ideal tool to locate vocal messages in speci. c areas. The system DS112P / T is designed to operate in the vertical direction, from top to bottom, so that its coverage area is identi. ed in the space below it, within a cone of about 80 degrees. Outside of this area of coverage, the sound level is reduced as much as 15-20 dB. The housing of the DS110SP is made of steel, which has been treated and painted to provide the unit with high resistance against atmospheric agents over time.. Degree of protection IP 55.

Technical specifications

Model DS112P – DS112PT
System type Two-way high directivity System MTM circular configuration
Input power rating (continuous) 300W (8Ω)
Input power rating (peak) 600W (8Ω)
Nominal Impedance 8Ω (DS112P)
Constant Voltage Binding 100V (only transformer version DS112PT)
Power Taps to 100V 25/50/100W (only transformer version DS112PT)
Frequency response 110Hz – 16kHz (-3dB)
80Hz – 18kHz (-10dB)
Maximum (peak) Output 124dB @ 1m
Low Frequency Device 12 x 3.5″ wide-band speakers with coil 25mm
High Frequency Device 1 x 1” compression driver with coil 38mm
Angular coverage <78°
Crossover Frequency 2400 Hz
Mounting Pole custom arm or flange (wall / ceiling)
Connectors 2 pole cable
Material Steel Box (z/c treatment)
Finish P/E Scratch-proof coating
Color Standard RAL 9007
Colo Custom
Weight 9 kg
Dimensions Ø510 x H208 mm
Protection rating IP55 Δ

Related products

PROEL-COMMERCIAL-AUDIO-300x300-1
DS112P
LNE SYSTEM SERIES 2 WAY FULL RANGE HIGH DIRECTIVITY PASSIVE SPEAKER

‘Engineered and designed be a system capable of providing sound reinforcement in a limited area minimising the emission of noise / disturbance to the surrounding areas. Small in size, the system can be integrated to any structure type ceiling, walls and roofs, both indoors and outdoors. The speaker is equipped with custom transducers, studied speci. Cally for this project to create a sound that has both high . delity and high directivity. The DS112P / T is a two-way speaker system with highly controlled directivity. Its configuration allows it to control directivity as low as medium-low frequencies (around 500Hz), even though the physical dimensions are very small. This marked tendency to control the energy emitted within its cone of radiation especially in the vocal range makes it ideal tool to locate vocal messages in speci. c areas. The system DS112P / T is designed to operate in the vertical direction, from top to bottom, so that its coverage area is identi. ed in the space below it, within a cone of about 80 degrees. Outside of this area of coverage, the sound level is reduced as much as 15-20 dB. The housing of the DS110SP is made of steel, which has been treated and painted to provide the unit with high resistance against atmospheric agents over time.. Degree of protection IP 55.

Model DS112P – DS112PT
System type Two-way high directivity System MTM circular configuration
Input power rating (continuous) 300W (8Ω)
Input power rating (peak) 600W (8Ω)
Nominal Impedance 8Ω (DS112P)
Constant Voltage Binding 100V (only transformer version DS112PT)
Power Taps to 100V 25/50/100W (only transformer version DS112PT)
Frequency response 110Hz – 16kHz (-3dB)
80Hz – 18kHz (-10dB)
Maximum (peak) Output 124dB @ 1m
Low Frequency Device 12 x 3.5″ wide-band speakers with coil 25mm
High Frequency Device 1 x 1” compression driver with coil 38mm
Angular coverage <78°
Crossover Frequency 2400 Hz
Mounting Pole custom arm or flange (wall / ceiling)
Connectors 2 pole cable
Material Steel Box (z/c treatment)
Finish P/E Scratch-proof coating
Color Standard RAL 9007
Colo Custom
Weight 9 kg
Dimensions Ø510 x H208 mm
Protection rating IP55 Δ

Share this product

Facebook
Twitter
LinkedIn
Telegram
WhatsApp
Email
Skype